Bu eğiticide, örnekler yardımıyla Java TreeMap sınıfı ve işlemlerini öğreneceğiz.
TreeMap
Java koleksiyonları çerçeve sınıf ağaç veri yapısı uygulamasını sağlar.
NavigableMap arayüzünü uygular.
Bir Ağaç Haritası Oluşturma
Bir oluşturmak için TreeMap
önce java.util.TreeMap
paketi içe aktarmalıyız . Paketi içe aktardıktan sonra, işte TreeMap
Java'da nasıl bir tane oluşturabiliriz .
TreeMap numbers = new TreeMap();
Yukarıdaki kodda, TreeMap
herhangi bir argüman olmadan adlandırılmış bir sayı oluşturduk . Bu durumda, içindeki öğeler TreeMap
doğal olarak sıralanır (artan sırada).
Bununla birlikte, Comparator
arayüzü kullanarak öğelerin sıralanmasını özelleştirebiliriz . Daha sonra bu eğitimde öğreneceğiz.
Buraya,
- Anahtar - bir haritadaki her bir öğeyi (değeri) ilişkilendirmek için kullanılan benzersiz bir tanımlayıcı
- Değer - bir haritadaki anahtarlarla ilişkilendirilen öğeler
TreeMap Yöntemleri
TreeMap
Sınıf bize harita üzerinde işlemleri gerçekleştirmek için izin çeşitli yöntemler sağlar.
TreeMap'e Eleman Ekle
put()
- belirtilen anahtar / değer eşlemesini (giriş) haritaya eklerputAll()
- belirtilen haritadaki tüm girişleri bu haritaya eklerputIfAbsent()
- haritada belirtilen anahtar yoksa, belirtilen anahtar / değer eşlemesini haritaya ekler
Örneğin,
import java.util.TreeMap; class Main ( public static void main(String() args) ( // Creating TreeMap of even numbers TreeMap evenNumbers = new TreeMap(); // Using put() evenNumbers.put("Two", 2); evenNumbers.put("Four", 4); // Using putIfAbsent() evenNumbers.putIfAbsent("Six", 6); System.out.println("TreeMap of even numbers: " + evenNumbers); //Creating TreeMap of numbers TreeMap numbers = new TreeMap(); numbers.put("One", 1); // Using putAll() numbers.putAll(evenNumbers); System.out.println("TreeMap of numbers: " + numbers); ) )
Çıktı
Çift sayıların TreeMap'i: (Dört = 4, Altı = 6, İki = 2) Sayıların TreeMap'i: (Dört = 4, Bir = 1, Altı = 6, İki = 2)
TreeMap Öğelerine Erişim
1. entrySet (), keySet () ve değerleri () kullanma
entrySet()
- ağaç haritasının tüm anahtar / değer eşlemelerinin (giriş) bir kümesini döndürürkeySet()
- bir ağaç haritasının tüm anahtarlarını döndürürvalues()
- bir ağaç haritasının tüm haritalarını döndürür
Örneğin,
import java.util.TreeMap; class Main ( public static void main(String() args) ( TreeMap numbers = new TreeMap(); numbers.put("One", 1); numbers.put("Two", 2); numbers.put("Three", 3); System.out.println("TreeMap: " + numbers); // Using entrySet() System.out.println("Key/Value mappings: " + numbers.entrySet()); // Using keySet() System.out.println("Keys: " + numbers.keySet()); // Using values() System.out.println("Values: " + numbers.values()); ) )
Çıktı
TreeMap: (Bir = 1, Üç = 3, İki = 2) Anahtar / Değer eşlemeleri: (Bir = 1, Üç = 3, İki = 2) Anahtarlar: (Bir, Üç, İki) Değerler: (1, 3, 2 )
2. get () ve getOrDefault () kullanma
get()
- Belirtilen anahtarla ilişkili değeri döndürür. Anahtar bulunmazsa null döndürür.getOrDefault()
- Belirtilen anahtarla ilişkili değeri döndürür. Anahtar bulunmazsa, belirtilen varsayılan değeri döndürür.
Örneğin,
import java.util.TreeMap; class Main ( public static void main(String() args) ( TreeMap numbers = new TreeMap(); numbers.put("One", 1); numbers.put("Two", 2); numbers.put("Three", 3); System.out.println("TreeMap: " + numbers); // Using get() int value1 = numbers.get("Three"); System.out.println("Using get(): " + value1); // Using getOrDefault() int value2 = numbers.getOrDefault("Five", 5); System.out.println("Using getOrDefault(): " + value2); ) )
Çıktı
TreeMap: (Bir = 1, Üç = 3, İki = 2) get (): 3 kullanarak getOrDefault (): 5 kullanarak
Burada getOrDefault()
yöntem beş anahtarını bulamaz. Bu nedenle, belirtilen varsayılan değer 5'i döndürür.
TeeMap Öğelerini Kaldır
remove(key)
- belirtilen anahtarla ilişkili girişi bir TreeMap'ten döndürür ve kaldırırremove(key, value)
- girişi haritadan yalnızca belirtilen anahtar belirtilen değerle ilişkiliyse kaldırır ve bir boole değeri döndürür
Örneğin,
import java.util.TreeMap; class Main ( public static void main(String() args) ( TreeMap numbers = new TreeMap(); numbers.put("One", 1); numbers.put("Two", 2); numbers.put("Three", 3); System.out.println("TreeMap: " + numbers); // remove method with single parameter int value = numbers.remove("Two"); System.out.println("Removed value: " + value); // remove method with two parameters boolean result = numbers.remove("Three", 3); System.out.println("Is the entry (Three=3) removed? " + result); System.out.println("Updated TreeMap: " + numbers); ) )
Çıktı
TreeMap: (Bir = 1, Üç = 3, İki = 2) Kaldırılan değer = 2 Giriş (Üç = 3) kaldırıldı mı? Gerçek Güncellenmiş Ağaç Haritası: (Bir = 1)
TreeMap Öğelerini Değiştirin
replace(key, value)
- belirtilen anahtarla eşlenen değeri yeni değerle değiştirirreplace(key, old, new)
- yalnızca eski değer belirtilen anahtarla zaten ilişkilendirilmişse eski değeri yeni değerle değiştirirreplaceAll(function)
- haritanın her bir değerini belirtilen işlevin sonucuyla değiştirir
Örneğin,
import java.util.TreeMap; class Main ( public static void main(String() args) ( TreeMap numbers = new TreeMap(); numbers.put("First", 1); numbers.put("Second", 2); numbers.put("Third", 3); System.out.println("Original TreeMap: " + numbers); // Using replace() numbers.replace("Second", 22); numbers.replace("Third", 3, 33); System.out.println("TreeMap using replace: " + numbers); // Using replaceAll() numbers.replaceAll((key, oldValue) -> oldValue + 2); System.out.println("TreeMap using replaceAll: " + numbers); ) )
Çıktı
Original TreeMap: (First=1, Second=2, Third=3) TreeMap using replace(): (First=1, Second=22, Third=33) TreeMap using replaceAll(): (First=3, Second=24, Third=35)
In the above program notice the statement
numbers.replaceAll((key, oldValue) -> oldValue + 2);
Here, we have passed a lambda expression as an argument.
The replaceAll()
method accesses all the entries of the map. It then replaces all the elements with the new values (returned from the lambda expression).
Methods for Navigation
Since the TreeMap
class implements NavigableMap
, it provides various methods to navigate over the elements of the treemap.
1. First and Last Methods
firstKey()
- returns the first key of the mapfirstEntry()
- returns the key/value mapping of the first key of the maplastKey()
- returns the last key of the maplastEntry()
- returns the key/value mapping of the last key of the map
For example,
import java.util.TreeMap; class Main ( public static void main(String() args) ( TreeMap numbers = new TreeMap(); numbers.put("First", 1); numbers.put("Second", 2); numbers.put("Third", 3); System.out.println("TreeMap: " + numbers); // Using the firstKey() method String firstKey = numbers.firstKey(); System.out.println("First Key: " + firstKey); // Using the lastKey() method String lastKey = numbers.lastKey(); System.out.println("Last Key: " + lastKey); // Using firstEntry() method System.out.println("First Entry: " + numbers.firstEntry()); // Using the lastEntry() method System.out.println("Last Entry: " + numbers.lastEntry()); ) )
Output
TreeMap: (First=1, Second=2, Third=3) First Key: First Last Key: Third First Entry: First=1 Last Entry: Third=3
2. Ceiling, Floor, Higher and Lower Methods
- higherKey() - Returns the lowest key among those keys that are greater than the specified key.
- higherEntry() - Returns an entry associated with a key that is lowest among all those keys greater than the specified key.
- lowerKey() - Returns the greatest key among all those keys that are less than the specified key.
- lowerEntry() - Returns an entry associated with a key that is greatest among all those keys that are less than the specified key.
- ceilingKey() - Returns the lowest key among those keys that are greater than the specified key. If the key passed as an argument is present in the map, it returns that key.
- ceilingEntry() - Returns an entry associated with a key that is lowest among those keys that are greater than the specified key. It an entry associated with the key passed an argument is present in the map, it returns the entry associated with that key.
- floorKey() - Returns the greatest key among those keys that are less than the specified key. If the key passed as an argument is present, it returns that key.
- floorEntry() - Returns an entry associated with a key that is greatest among those keys that are less than the specified key. If the key passed as argument is present, it returns that key.
For example,
import java.util.TreeMap; class Main ( public static void main(String() args) ( TreeMap numbers = new TreeMap(); numbers.put("First", 1); numbers.put("Second", 5); numbers.put("Third", 4); numbers.put("Fourth", 6); System.out.println("TreeMap: " + numbers); // Using higher() System.out.println("Using higherKey(): " + numbers.higherKey("Fourth")); System.out.println("Using higherEntry(): " + numbers.higherEntry("Fourth")); // Using lower() System.out.println("Using lowerKey(): " + numbers.lowerKey("Fourth")); System.out.println("Using lowerEntry(): " + numbers.lowerEntry("Fourth")); // Using ceiling() System.out.println("Using ceilingKey(): " + numbers.ceilingKey("Fourth")); System.out.println("Using ceilingEntry(): " + numbers.ceilingEntry("Fourth")); // Using floor() System.out.println("Using floorKey(): " + numbers.floorKey("Fourth")); System.out.println("Using floorEntry(): " + numbers.floorEntry("Fourth")); ) )
Output
TreeMap: (First=1, Fourth=6, Second=5, Third=4) Using higherKey(): Second Using higherEntry(): Second=5 Using lowerKey(): First Using lowerEntry(): First=1 Using ceilingKey(): Fourth Using ceilingEntry(): Fourth=6 Using floorkey(): Fourth Using floorEntry(): Fourth=6
3. pollFirstEntry() and pollLastEntry() Methods
pollFirstEntry()
- returns and removes the entry associated with the first key of the mappollLastEntry()
- returns and removes the entry associated with the last key of the map
For example,
import java.util.TreeMap; class Main ( public static void main(String() args) ( TreeMap numbers = new TreeMap(); numbers.put("First", 1); numbers.put("Second", 2); numbers.put("Third", 3); System.out.println("TreeMap: " + numbers); //Using the pollFirstEntry() method System.out.println("Using pollFirstEntry(): " + numbers.pollFirstEntry()); // Using the pollLastEntry() method System.out.println("Using pollLastEntry(): " + numbers.pollLastEntry()); System.out.println("Updated TreeMap: " + numbers); ) )
Output
TreeMap: (First=1, Second=2, Third=3) Using pollFirstEntry(): First=1 Using pollLastEntry(): Third=3 Updated TreeMap: (Second=2)
4. headMap(), tailMap() and subMap() Methods
headMap(key, booleanValue)
The headMap()
method returns all the key/value pairs of a treemap before the specified key (which is passed as an argument).
The booleanValue parameter is optional. Its default value is false
.
If true
is passed as a booleanValue, the method also includes the key/value pair of the key
which is passed as an argument.
For example,
import java.util.TreeMap; class Main ( public static void main(String() args) ( TreeMap numbers = new TreeMap(); numbers.put("First", 1); numbers.put("Second", 2); numbers.put("Third", 3); numbers.put("Fourth", 4); System.out.println("TreeMap: " + numbers); System.out.println("Using headMap() Method:"); // Using headMap() with default booleanValue System.out.println("Without boolean value: " + numbers.headMap("Fourth")); // Using headMap() with specified booleanValue System.out.println("With boolean value: " + numbers.headMap("Fourth", true)); ) )
Output
TreeMap: (First=1, Fourth=4, Second=2, Third=3) Using headMap() Method: Without boolean value: (First=1) With boolean value: (First=1, Fourth=4)
tailMap(key, booleanValue)
The tailMap()
method returns all the key/value pairs of a treemap starting from the specified key (which is passed as an argument).
The booleanValue is an optional parameter. Its default value is true
.
If false
is passed as a booleanValue, the method doesn't include the key/value pair of the specified key
.
For example,
import java.util.TreeMap; class Main ( public static void main(String() args) ( TreeMap numbers = new TreeMap(); numbers.put("First", 1); numbers.put("Second", 2); numbers.put("Third", 3); numbers.put("Fourth", 4); System.out.println("TreeMap: " + numbers); System.out.println("Using tailMap() Method:"); // Using tailMap() with default booleanValue System.out.println("Without boolean value: " + numbers.tailMap("Second")); // Using tailMap() with specified booleanValue System.out.println("With boolean value: " + numbers.tailMap("Second", false)); ) )
Output
TreeMap: (First=1, Fourth=4, Second=2, Third=3) Using tailMap() Method: Without boolean value: (Second=2, Third=3) With boolean value: (Third=3)
subMap(k1, bV1, k2, bV2)
The subMap()
method returns all the entries associated with keys between k1 and k2 including the entry of k1.
The bV1 and bV2 are optional boolean parameters. The default value of bV1 is true
and the default value of bV2 is false
.
If false
is passed as bV1, the method returns all the entries associated with keys between k1 and k2 without including the entry of k1.
If true
is passed as bV2, the method returns all the entries associated with keys between k1 and k2 including the entry of k2.
For example,
import java.util.TreeMap; class Main ( public static void main(String() args) ( TreeMap numbers = new TreeMap(); numbers.put("First", 1); numbers.put("Second", 2); numbers.put("Third", 3); numbers.put("Fourth", 4); System.out.println("TreeMap: " + numbers); System.out.println("Using subMap() Method:"); // Using subMap() with default booleanValue System.out.println("Without boolean value: " + numbers.subMap("Fourth", "Third")); // Using subMap() with specified booleanValue System.out.println("With boolean value: " + numbers.subMap("Fourth", false, "Third", true)); ) )
Output
TreeMap: (First=1, Fourth=2, Second=2, Third=3) Using subMap() Method: Without boolean value: (Fourth=4, Second=2) With boolean value: (Second=2, Third=3)
Other Methods of TreeMap
Method | Description |
---|---|
clone() | Creates a copy of the TreeMap |
containsKey() | Searches the TreeMap for the specified key and returns a boolean result |
containsValue() | Searches the TreeMap for the specified value and returns a boolean result |
size() | Returns the size of the TreeMap |
clear() | Removes all the entries from the TreeMap |
TreeMap Comparator
In all the examples above, treemap elements are sorted naturally (in ascending order). However, we can also customize the ordering of keys.
For this, we need to create our own comparator class based on which keys in a treemap are sorted. For example,
import java.util.TreeMap; import java.util.Comparator; class Main ( public static void main(String() args) ( // Creating a treemap with a customized comparator TreeMap numbers = new TreeMap(new CustomComparator()); numbers.put("First", 1); numbers.put("Second", 2); numbers.put("Third", 3); numbers.put("Fourth", 4); System.out.println("TreeMap: " + numbers); ) // Creating a comparator class public static class CustomComparator implements Comparator ( @Override public int compare(String number1, String number2) ( int value = number1.compareTo(number2); // elements are sorted in reverse order if (value> 0) ( return -1; ) else if (value < 0) ( return 1; ) else ( return 0; ) ) ) )
Output
TreeMap: (Third=3, Second=2, Fourth=4, First=1)
Yukarıdaki örnekte, CustomComparator sınıfını argüman olarak geçiren bir ağaç haritası oluşturduk.
CustomComparator sınıfı Comparator
arabirimi uygular .
Daha sonra, compare()
öğeleri ters sırada sıralamak için yöntemi geçersiz kılıyoruz .
Daha fazla bilgi edinmek için Java Comparator (resmi Java belgeleri) sayfasını ziyaret edin.